Erasing TV IR codes

Setting Up the Remote for On-Screen Control

7When “PUSH YOUR REMOTE” appears in the on-screen display, press the button on the TV's remote that corresponds to the highlighted control button (e.g., POWER).

•If your TV’s remote has an independent input selector button (e.g., VIDEO 1).

Register the IR code of this button when the VIDEO 1 button appears. When you turn on the receiver, the TV switches to the video input automatically.

•If your TV does not have an independent input selector button or has a cyclic input selector button.

Do not register an IR code of the input selector button. The TV’s input cannot be switched automatically when you turn on the receiver. Switch the TV to the video input manually. If you registered an IR code for the VIDEO 1 button, erase the VIDEO 1 code following the steps in “To erase a specific IR code” below.

•If you selected WIDE in step 4.

	TV IR SET
TV IR SET		TV POWER
		VIDEO 1
PUSH	YOUR	REMOTE
	CODE CLEAR
RETURN		EXIT

For Australian models

The on-screen display also includes the following settings for your TV's remote control.

•TV/VIDEO : Use to program the cyclic input selector button on your TV’s remote. This allows you to switch the TV’s input selector using this unit’s remote. Do not program an independant input selector button at this setting.

•WIDE TV DISPLAY MODE: Use to program the wide TV mode button on your TV’s remote.

LEARNING

SENSOR

TV's remote

When registering the IR code, be sure to do the following; otherwise, the IR code may not be registered correctly.

•Point the remote at the LEARNING SENSOR on the receiver from a distance of less than 4 inches (10 cm).

•Hold down the button on the remote for about 2 or 3 seconds until the “RECEIVING” display switches to

“RELEASE YOUR REMOTE”.

•Keep the remote pointed horizontally at the LEARNING SENSOR until the code is registered.

8Repeat step 7 for the remaining buttons that appear in the on-screen display.

If “NG” is displayed, an IR code was not registered correctly. In this case, repeat step 7 again.

To return to the main menu

Click EXIT.

To return to a previous menu

Click RETURN.

zTo exchange from a non-Sony TV to a Sony TV

Connect the receiver’s MONITOR OUT jack to the VIDEO 1 input jack of the Sony TV. Follow the registration steps 1 to 3, then click SONY TV in step 4. Click VIDEO 1 2 3 and/or WIDE to specify VIDEO 1 and/or WIDE if necessary.

Note

Some IR codes may not have been successfully registered, even if “RELEASE YOUR REMOTE” appears on the TV screen. In this case, try registering the IR code again. If the IR code still cannot be registered, follow the procedure described in “Registering Desired Components (User IR setting)” on page 38.

Click CODE CLEAR in the TV IR SET menu that appears when you click START.

•To erase a specific IR code

1Click SINGLE IR CODE CLEAR. “SELECT CLEAR CODE KEY” appears.

2Click the button you want to clear. “ARE YOU SURE?” appears.

3Click YES to erase the code.

To cancel erasing, click NO.

To erase another code repeat steps 2 and 3.

•To erase all the TV IR codes

1Click TV IR CODE CLEAR. “ARE YOU SURE?” appears.

2Click YES to erase the codes.

“CODE CLEAR!” appears in the display. To cancel erasing, click NO.

STR-DA90ESG specifications

The Sony STR-DA90ESG is a high-performance A/V receiver that made waves in the late 1990s, becoming a favorite among audiophiles and home theater enthusiasts. This 5.1-channel receiver is recognized for its robust build quality and an impressive array of features that elevate the home entertainment experience.

At the heart of the STR-DA90ESG is its powerful amplification system. It delivers a continuous 90 watts per channel into 8 ohms, allowing for crystal-clear sound reproduction across a diverse range of audio frequencies. The receiver supports Dolby Digital and DTS formats, enhancing the surround sound experience for movies and music, making it a solid choice for home cinema setups.

One of the standout features of the STR-DA90ESG is its Digital Signal Processing (DSP) capabilities. The receiver includes various sound modes that can be tailored to suit different listening environments. Users can choose from multiple surround simulation settings to create an immersive audio experience, whether during a blockbuster movie or while listening to music.

The receiver is equipped with multiple input options, including six audio inputs and three video inputs, ensuring compatibility with a variety of devices. The inclusion of component video inputs allows for connections to high-definition sources, which was ahead of its time, catering to the evolving consumer landscape of the late 90s. This versatility makes it easy for users to switch between devices seamlessly, enhancing user convenience.

Another defining characteristic of the STR-DA90ESG is its build quality. Sony has a longstanding reputation for creating durable and reliable products, and this receiver is no exception. The solid chassis helps reduce vibrations and electromagnetic interference, which contributes to better sound quality overall.

In terms of user interface, the receiver offers a straightforward LED display and an intuitive remote control that facilitates easy navigation through settings and adjustments. The ability to store custom sound settings also adds a personal touch to the listening experience.

Overall, the Sony STR-DA90ESG stands as a testament to the brand's commitment to quality audio and video performance. Its blend of powerful amplification, versatile connectivity, and user-friendly features makes it a timeless choice for those looking to enhance their home entertainment setup. Even years after its release, the STR-DA90ESG remains a respected component in the realm of audio and home theater systems.

Sony STR-DA90ESG manual Erasing TV IR codes

Models: STR-DA90ESG

•If you selected WIDE in step 4.

For Australian models

zTo exchange from a non-Sony TV to a Sony TV