![](/images/new-backgrounds/1038669/38669103x1.webp)
Front Panel Operations (Remote
Digital Recording
EXAMPLE: Recording a CD using a DAT deck.
See your DAT or CD player’s instruction manual if you need help.
1Turn FUNCTION to select DAT/MD, then press INPUT MODE repeatedly to select “DIGITAL (OPTICAL)”.
2Turn FUNCTION to select CD, then press INPUT MODE repeatedly to select “DIGITAL (OPTICAL)”.
3Insert a blank digital audio tape into the DAT for recording.
4Start recording on the DAT, then start playing the CD you want to record.
Note
You cannot record the digital signal from a Dolby Digital
Adjusting the Sound
The adjusted sounds are stored automatically.
To select the sound fields
For the
Press GENRE repeatedly to display the sound fields genres, then press MODE repeatedly to display the sound fields mode. For the list of sound fields, see page 31.
To turn off the sound fields
Press SOUND FIELD.
To adjust the equalizer parameters
For the
1Start playing a component, then select the sound field you want to adjust.
2Open the control panel and press EQUALIZER CH repeatedly to select Front (F), Center (C) or Rear (R).
3Press EQUALIZER BAND repeatedly to select Bass (BASS) or Treble (TREBLE).
4Use digital processing control buttons (B/b) to adjust the level, then use (V/v) to select the frequency (Hz) and use (B/b) to adjust the frequency. Repeat until you obtain the sound you desire. You can adjust the level ± 10 dB in 0.5 dB steps.
Front speaker bass adjustment
Level : F: BASS 0dB
Frequency : F: BASS 250Hz
Front speaker treble adjustment
Level : F: TREBLE 0dB
Frequency : F: TREBLE 2.5kHz
Center speaker bass adjustment
Level : C: BASS 0dB
Frequency : C: BASS 250Hz
Center speaker treble adjustment
Level : C: TREBLE 0dB
Frequency : C: TREBLE 2.5kHz
Rear speaker bass adjustment
Level : R: BASS 0dB
Frequency : R: BASS 250Hz
Rear speaker treble adjustment
Level : R: TREBLE 0dB
Frequency : R: TREBLE 2.5kHz
52