T-Tech JNCXFE instruction manual Testing The Battery, Storage

Q. Can the Jump-N-Carrybattery be replaced?

A.Yes, call Technical Service at (913) 310-1050 (U.S.).

Q.Can the Jump-N-Carrybe recycled?

A.Yes, the environment was one of our main concerns in the development and design of the Jump-N-Carry. Most battery outlets can dispose of this product at its life's end. In fact, your Jump-N-Carrycontains a sealed, non-spillable lead acid battery and proper disposal is required by law. See Battery Removal and Disposal Instructions.

Q.I have a regular 10 amp battery charger, can I use it to recharge the Jump-N-Carry?

A.No, only the methods reviewed in the “Recharging” section should be used.

Q.Is the Jump-N-Carrygoof proof?

A.No, jump starting instructions must be followed. Read and understand all safety and operating instructions in this manual and those found in the owner’s manual of any vehicle being jump started before using your Jump-N-Carry.

Testing The Battery

After fully charging the battery (see “Recharging” section), apply a 100 amp load to the unit for a period of 6 seconds, while monitoring the battery voltage. The battery is good if the voltage is 9.5 Vdc or higher.

Storage

The Jump-N-Carrymay be stored virtually anywhere, and in any position. However, take precautions to ensure that the positive and negative clamps do not come into contact with each other or a common metal surface. We recommend storing the Jump-N-Carryin the box in which it was originally received. Always be sure to re-wrap cables and re-holster clamps after each use and prior to extended storage.