The computer does not enter Standby or Suspend mode with the Fn+F10 hot keys.
•You might be using a PC Card that prevents the computer from entering Suspend mode. To enter the mode, stop the communication program and then remove the card or stop the card.
Printer Problems (connected through optional docking station)
The printer does not work.
•Make sure that the printer is turned on (if with independent power source) and is online (ready to use).
•Make sure that the printer’s signal cable is properly connected.
•Make sure that the printer driver is correctly installed.
•Make sure that you have assigned the printer port correctly in your operating system or application program.
•Make sure that the printer port is enabled in the SCU program.
The printer prints garbled information.
•Make sure that the printer driver is correctly installed.
•Make sure that the printer cable is properly connected.
Software Problems
An application program does not work correctly.
•Make sure that the software is correctly installed.
•If an error message appears on the screen, consult the software program’s documentation for further information.
•If you are sure the operation has stopped reset the computer. (See “Resetting the Computer” in this chapter.)
Troubleshooting |
