•If you are using the battery power, make sure that the battery is not discharged.
When you turn on the computer, it stops after POST.
•Restart your computer.
The message “Operating system not found” appears on the screen after you turn on the computer.
•Make sure that there is no floppy disk in the floppy disk drive (when connected to the docking station). If there is, remove it and restart the system.
•If this message appears when you are booting from the hard disk, insert a bootable disk in the floppy disk drive and check the condition of the hard disk.
•Make sure that the hard disk is set correctly in the SCU program.
The message “Invalid system disk” or “Disk error” appears on the screen after you turn on the computer.
•If you are deliberately trying to boot from a floppy disk, replace the disk with a bootable one and press any key to continue booting.
•If you are booting from the hard disk, make sure that there is no floppy disk in the floppy disk drive (when connected to the docking station). If there is, remove it and restart the system.
•If this message appears when you are booting from the hard disk, insert a bootable disk in the floppy disk drive (when connected to the docking station) and check the condition of the hard disk.
•Make sure that the hard disk is set correctly in the SCU program.
Troubleshooting |
