TAG MIL-BOOK 200 Series manual Using the Touchscreen option

Using the Touchscreen (option)

CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. Use the included touchscreen pen (option) located on the handle.

The touchscreen is a touch-sensitive device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.

The touchscreen needs a special device driver support that allows you to easily use the computer without a mouse or touchpad. (For information on installing the driver, see Chapter 6.)

Here are some common terms that you should know when using the touchscreen:

Term	Action
Click/Point	Tap gently on the touchscreen.
Double-click	Tap twice on the touchscreen rapidly.
Drag and	Press lightly on the touchscreen and move your finger
drop	until you reach your destination (drag). Finally, release
	your finger (drop) when you finish dragging your selection
	to the destination. The object will drop into the new
	location.
Scroll	To scroll is to move up and down or left and right in the
	working area on the screen.
	To move vertically, place your finger on the right edge of
	the touchscreen and slide your finger up and down along
	the edge. To move horizontally, place your finger on the
	bottom edge of the touchscreen and slide your finger left
	and right.
	This function works only after you install the touchscreen
	driver supplied with the computer and it may not work for
	all applications.

Operating Your Computer 2-13