TAG MIL-BOOK 200 Series manual LPT Port, MC97 Controller

Models: MIL-BOOK 200 Series

1 143
Download 143 pages 32.41 Kb
Page 89
Image 89

LPT Port

This item configures the parallel port of the computer.

Port Address sets the I/O address and the Interrupt ReQuest line settings of the parallel port. The options are None; LPT1, 378, IRQ7; LPT2, 278, IRQ5; and LPT3, 3BC, IRQ7.

Port Definition sets the operating mode for the parallel port according to the type of the parallel device to be connected. Your system supports EPP (Enhanced Parallel Port) and ECP (Extended Capabilities Port) standards, which turn the standard parallel port into a high-speed bi-directional peripheral port. The options are Standard AT (Centronics), Bidirectional (PS-2), Enhanced Parallel (EPP), and Extended Capabilities (ECP). This item is not valid for setting if the Port Address item is set to None.

MC97 Controller

Enables or disables the system’s support for PCI modem device. A check mark ( ) indicates enabled; an underline (_) indicates disabled.

5-10

Setup Configuration Utility (SCU)

Page 89
Image 89
TAG MIL-BOOK 200 Series manual LPT Port, MC97 Controller