Maintenance schedule
Below you will find some general maintenance instructions.
For further information please contact your service dealer.
Daily maintenance
•Clean the exterior of the unit.
•Check the blade guard for damage or cracks. Change the guard in case of impacts or cracks.
•Check that the cutting attachment is properly centered, sharp, and without cracks. As
•Check that the cutting attachment nut is sufficiently tightened.
•Check that nuts and screws are sufficiently tightened.
Weekly maintenance
•Check the starter, especially cord and return spring.
•Clean the exterior of the spark plug.
•Remove it and check the electrode gap. Adjust it to 0.6 mm, or change the spark plug.
•Clean the cooling fins on the cylinder and make sure the air intake at the starter is not clogged.
•Check that the angle gear is filled with grease up to ¾.
•Clean the air filter.
Monthly maintenance
•Rinse the fuel tank with gasoline.
•Clean the exterior of the carburetor and the space around it.
•Clean the fan and the space around it.
10 |