TANDBERG C20, C20 PLUS Making calls by dialing the number, Terminating an ongoing call, When someone is calling

What’s in this guide? Getting started Making calls Using the phone book In-call features Advanced settings

Making calls

D1458203 USER G UIDE Proﬁle Seri es, Codec C Series, Q uick Set C20 / C20 Plus (TC3)— March 2010

Making calls by dialing the number

The term “number” has a wide deﬁnition here—you may use the

procedure outlined on this page to call people by their alphanumeric

address as well, for example:

“helen.karr@company.com”

Do as follows:

1. Key in the “number” to call. If needed, switch to alphanumeric or

numeric setting by means of the abc/123 softkey.

2. Press the softkey Special charac ters to access non-standard

characters, if needed. See Special characters on page 8 for more on

this.

3. Press followed by or, press twice to start calling.

Note that the system will search for matches as you write along.

Terminating an ongoing call

Terminating an ongoing call is similar to terminating calls on a cell phone—

just press the key on the remote control.

When someone is calling

Respond to an incoming call by pressing the key on the remote control

to accept it, or press the key to reject it.

Press the key on the

remote control to terminate

an ongoing call.

Press the

key on

the remote

control to reject

an incoming

call.

Press the

key on the

remote control

to answer an

incoming call.

You may alter the call rate setting before you pl ace the call, if needed. Look for

softkey number two from the r ight ( ). Press the corresponding

function key to display the Call rate set ting menu. Select a new setting, if required.

Press the key to produce

the call menu, if needed.

Position the cursor at Call

and press to display the

submenu.

As soon as you start to key in, the

system will look for possible matches

in the Recent calls list, M y contacts,

and the Phone book.