What’s in this guide? Getting started Making calls Using the phone book In-call features Advanced settings
Advanced setti ngs
41
D1458203 USER G UIDE Profile Seri es, Codec C Series, Q uick Set C20 / C20 Plus (TC3)— March 2010
Softbutton—Camera PresetIf you want direct access (via the softbuttons along the bottom line of
the screen) to predefined camera presets, you should assign the function
Camera preset to one or more of the softbuttons.
Note that camera presets must have been defined before you start
assigning presets to any of the softbuttons—see page 11 for more on
camera presets.
In the following we will use softbutton 1 as an example, but the function
may be assigned to any of the five softbuttons.
Do as follows:
1. Navigate down to the softbuttons options as shown on page 39. Make
sure you have decided whether your setting shall apply to idle or in
call. If you want it to apply to both situations you must do this twice,
one setting for each case—see the tip on page 39 for more on this.
2. Expand the Camera prese t menu.
3. Use the and arrow keys to go between the presets existing.
4. Press the key to exit the menu putting changes into effect or the
arrow key to leave the menu going one step back.
Below is an example showing how the softbuttons appear when
assignments have been made.