TANDBERG manual General information, About the MSE 8350 IP GW blade, Port and LED location

General information

General information

About the MSE 8350 IP GW blade

The MSE 8350 IP GW blade fits into an MSE 8000 chassis. The IP GW blade is a voice and video gateway that allows calls to be made between pairs of IP endpoints that cannot normally connect directly to each other. A second Ethernet port allows for connections between two completely independent networks of endpoints. A built-in auto attendant and support for manual operators allow easy connection of calls where the endpoint cannot directly address the destination endpoint. The

IP GW blade translates call signalling (for example, between SIP and H.323) and can connect between almost any two endpoints. The IP GW blade can transcode all media to ensure the call takes place.

Port and LED location

Figure 1 shows the position of ports and LEDs on the IP GW blade.

Figure 1: IP GW blade front panel

Compact Flash

Activity LED

Console

Link LED

Console Port

Status LED

Alarm LED

System Load
LEDs
Ethernet Ports
	Ethernet Port
Power LED	Status LEDs

1