Menus
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page C-11
ST.TM.E10100.1

Table C.12: Sync Data Menu (High Speed RS-422 Data Enabler Card Fitted)

Display title: Sync Data Description

WW Streams PID XXXX
YYYYYYYYYYY
WW is the number of High speed data streams present
XXXX is the currently selected HSD PID
YYYYYYYYYYY is the stream status (PRESENT, NOT PRESENT)
Bit-rate XXXXX is the Synchronous data bit-rate (Up to 2.048 Mbit/s)
YYYYYYYY is editable control (ENABLED, DISABLED)
ZZZZ is the output status (OK, STOP, FAIL)
C.6.5 Teletext Menu

The Teletext submenu contains information about the audio format and

quality of the currently decoded audio stream on the primary output.

Table C.13: Teletext Menu

Display title: Teletext Description

XX Streams PID YYYY
ZZZZZZZZZZZZZZ
XX is the number of Teletext streams present
YYYY is the currently selected teletext PID
ZZZZZZZZZZZZZZ is the stream status (PRESENT NOT PRESENT)
Insertion
XXXXXXXX YYYY
XXXXXX is the editable insertion status (ENABLED, DISABLED)
YYYY is the output status (OK, STOP, FAIL)
C.6.6 VBI Menu

The VBI status submenu displays the current status of the VBI

components.

Table C.14: VBI Menu

Display title: VBI Description

VBI
XX Streams PID YYYY XX is the number of VBI streams present
YYYY is the currently selected VBI PID
ZZZZZZZZZZZ is the stream status (PRESENT, NOT PRESENT)
VPS XXXXXXXXXXX
YYYYYYY ZZZZ
XXXXXXXXXXX indicates the presence of VPS data (PRESENT, NOT
PRESENT)
YYYYYYY is the editable parameter for enabling VPS pass through (ENABLED,
DISABLED)
ZZZZ indicates the status of the output (OK, STOP, FAIL)
WSS XXXXXXXXXXX
YYYYYYY ZZZZ
XXXXXXXXXXX indicates the presence of WSS data (PRESENT, NOT
PRESENT)
YYYYYYY is the editable parameter for enabling WSS pass through (ENABLED,
DISABLED)
ZZZZ indicates the status of the output (OK, STOP, FAIL)
VITC Insertion
YYYYYYYY ZZZZ
YYYYYYY is the editable parameter for enabling VITC pass through (ENABLED,
DISABLED)
ZZZZ indicates the status of the output (OK, STOP, FAIL)
525 VITC LINE WW & XX
625 VITC LINE YY & ZZ
WW is the editable parameter for specifying the first insertion line for 525 VITC
XX is the editable parameter for specifying the second insertion line for 525
VITC
YY is the editable parameter for specifying the first insertion line for 625 VITC
ZZ is the editable parameter for specifying the second insertion line for 625 VITC