Operating the Equipment Locally
Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder Page 3-7
ST.TM.E10100.1
3.4 Using the Local Controls

3.4.1 LCD Menu Descriptions

Detailed LCD menu descrip tions are given in Annex C, Menus. This chapter
concentrates on describing the use of the menus for local operation.

3.4.2 Selecting a Menu Option

Some items shown in the rig ht display area of the fron t panel LCD display
have a set number of options. An example of this is the VIDEO TEST
PATTERN (Menu #3.1.6) which has a number of preset Video Test Patterns
associated with it. Use the following steps as a general guide to selecting
an option.
Table 3.3: Selecting a Menu Option
Step Action Result
1 Select the menu and display the required
selection. Normally there is only one selectable item. If there is more than
one, use the RIGHT and LEFT pushbuttons as described in
Table 3.4.
2 Press EDIT on the front panel. The LED will come on to show the TT1260 is in EDIT mode.
3 Use the arrow pushbuttons to step through
the options. This action scrolls through the options in a continuous loop.
4 Press SAVE to store the option or press
EDIT to cancel the selection and return to
the source menu.

3.4.3 Entering a Menu Value

Some items shown in the rig ht display area of the fron t panel LCD display
have a user-entered value. An example of this is the VIDEO OUTPUT LEVEL
(Menu #3.1.10) in which the video output level has to be entered. Use the
following steps as a general guide to entering a value.
Table 3.4: Entering a Menu Value
Step Action Result
1 Select the menu and display the required
selection.
2 Press EDIT on the front panel. The LED will come on to show the TT1260 is in EDIT mode.
3 Use the RIGHT or LEFT pushbutton to
move the cursor to the required digit. Each pushbutton has a built-in LED that turns on if the pushbutton
function is appropriate to the displayed information.
4 Change the value by using the arrow
pushbuttons.
5 Press SAVE to store the option.