Operating the Equipment Locally
Page 3-18 Instruction Manual: TT1260 Standard Definition Professional Receiver/Decoder
ST.TM.E10100.1
3.10.2 Setting up a Preset Service

Follow the steps in Table 3.22 to store the current Service as a preset.

Table 3.22: Setting up a Preset Service

Step Action Result
1 Use the menus to set up the unit so that the
required Service is current.
(Refer to Sections 3.5 and 3.6)
This selects the Service and associated parameters for the
preset process.
2 Go to Menu #1 to view the Preset menu. This displays the menu which allows the Current Service to be
stored at a chosen location (01 – 40). If there is no Current
Service, the menu display reads NO STORED SERVICE.
3 Select a location to store the preset.
The EDIT mode cannot be entered unless a
valid Service being decoded.
Use EDIT and the arrow pushbuttons to step through the stored
items. This allows a specific location to be chosen. Any vacant
locations are marked by NO STORED SERVICE.
4 Press SAVE. This stores the current Service and its associated parameters
as a preset in the selected location. This adds the Service to the
list displayed on page 1.

NOTE…

It is possible to store a service to a preset unless that service is being received (including all the

required components such as video, audio, data, VBI, etc.