StorageLoader 2U LTO | Quick Start Guide |
Step 4 continued — Powering on and Removing the Shipping Lock
| Important: Some views show the library with the |
| top cover removed for clarity |
| the top cover or you will void your warranty! |
| 5 — Rotate the robot by pushing the lock handle |
TOP VIEWS FOR REFERENCE ONLY | toward the back of the library. This moves the |
locking “tab” out from under the rail. | |
| a. Gently push the lock handle to the right |
| approximately 1 inch (2.5cm). |
| Important: If you do not remove (rotate and lift) |
| the shipping lock as described in steps b and c, |
| you can catch and damage cables inside the library |
| and render it useless. |
| b. Rotate the back of the lock up toward the |
| top of the library 2 inches (5cm), and then lift |
| the front of the lock up 2 inches (5cm). |
| c. Slowly pull the shipping lock out of the |
| opening. |
| 6 — Slide the left magazine straight back |
| into the library. |
| 7 — Power the library on (press the I). |
| 8 — Power the host computer on. |
| Reinsert the screw in the shipping lock and store |
| them with these instructions in case you need to |
| move or ship the library later. |
Page 4 of 8
