OPERATION AND FUNCTIONS
On, Off and standby
1Turn on the amplifier by pressing the mains switch.
2Press the standby button on the remote control to switch to standby mode. The display will turn off and all functions will be reduced to a minimum to make sure that the amplifier uses minimal power. When in standby mode the unit only reacts to the standby button of the remote
control.
3If you wish to turn off the unit to avoid any power consumption, you must press the mains switch.
1
3
POWER
HEADPHONE | 2 |
| PH |
+
Protect the environment and turn off the unit after use.
Selecting the input source
Turn on the
Now you can call the input source that is active at the moment. Select Tuner to listen to the radio, CD to listen to a CD, DVD, Phono, AUX1 or AUX2 if units have been connected to these inputs.
If you do not know which input has been selected, the LCD display will clearly indicate it.
Note: All inputs are analogue stereo inputs. It means that you cannot connect a digital sound source through a digital cable (optical or
PHONO | TUNER | DVD | CD | AUX 1 | AUX 2 | FUNCTION |
Press the Phono, DVD, CD, Tuner AUX 1 or AUX 2 button on the remote control to select the corresponding input.
Press the Phono, DVD, CD, Tuner, AUX 1 or AUX 2 button on the front panel to select the corresponding input.
+
13