IMPORTANT INFORMATION
Handling instructions
The top and back panel of the unit may become warm after prolonged use. This is not due to a defect.
Turn off the power when the unit is not used.
Protect the power cord
Follow the instructions below to prevent abnormal operation, electrical shock, fire or personal injury:
Hold the plug firmly when inserting it into the socket.
Avoid
Do not place objects on the power cord.
Do not carry out service work on or change the power cord.
Condensation
Condensation may occur in the following cases:
When the amplifier is moved directly from a cold to a warm place.
When the amplifier is used in a room where the radiator has just been switched on or a place where the cold air from the
If the amplifier is used in the summer in a warm and humid room just after it has been moved from an
If there is steam or a high level of humidity in the room.
In case of condensation, the amplifier will not work properly. Turn off the unit. Unplug the unit and leave it for
Positioning
Do not place the unit in any of the following places:
In sunlight, close to
In places with high temperatures (40C or more) or high relative humidity (90% or more).
In dirty places as some internal parts may be damaged.
Do not put your fingers or any other objects into the unit
Touching the internal parts is dangerous and may cause injury or damage. Do not open the cabinet. Do not place any foreign matter in the unit.
Interference
Placing the amplifier near a television set, radio or video player may cause poor picture and sound quality. In that case, move the amplifier further away from the television set, radio or video player.
06