Tangent AMP-50 operation manual OPERATION AND FUNCTIONS Balance control, Loudness

OPERATION AND FUNCTIONS

Balance control

This amplifier features balance control that allows adjustment of the volume of one loudspeaker at a time by +/- 38,75 dB, divided into 32 steps.

This function is used to compensate for a non-centred listening position, and makes it possible to get back the stereo perspective.

VOLUME

2

PHONO TUNER DVD CD AUX 1 AUX 2 FUNCTION

1

1Press the FUNCTION button on the front panel three times until information on balance control is displayed.

2Turn the volume control to adjust balance.

Note

If the balance control is not operated within five seconds, the display will return to the volume information display.

Loudness

This amplifier features a loudness function that allows boosting of the volume of the low frequencies at low volume.

This function is active at frequencies between 20Hz and 800Hz, and the function is dampened when the amplifier volume is increased. When the volume is at the maximum setting, the loudness function is completely cut out.

VOLUME

2

PHONO TUNER DVD CD AUX 1 AUX 2 FUNCTION

1

1Press the FUNCTION button on the front panel four times until information on loudness is displayed.

2Turn the volume control to the right to activate the loudness function and to the left to deactivate the loudness function.

Note

If the loudness function is not operated within five seconds, the display will return to the volume information display.

16