Tanita BD-815U instruction manual Safety Notes, Instructions for Measurement

	Safety Notes (continued)
	Instructions for Measurement
GB	Please observe the following instructions for accurate measurement.
	• Measurement may not be possible on a surface that is strongly vibrating. In such cases
	transfer the equipment to a stable surface with little or no vibration.
	• In the case to move to a place with a temperature difference of 36˚F (20˚C) or more, leave
	it before use for 2 hours or more after moving.
	• While taking measurements, please keep any persons using transmitters, such as a
	cellular phone, away from the unit to avoid causing margin errors.
	<Usage Conditions>
	Temperature Range for Use : 41˚F - 95˚F (5˚C - 35˚C)
	Relative Humidity	: 30% - 80% (without condensation)

<Storage Conditions>

Temperature Range of Environment : 14˚F - 122˚F (-10˚C - +50˚C)

Range of Relative Humidity : 10% - 90% (without condensation)

To avoid malfunctions, avoid storing the equipment where there is direct sunlight, significant temperature changes, the risk of dampness, a large amount of dust, in the vicinity of fires, or where there is the risk of receiving vibrations or shocks.

Explanation of terminology

• Capacity
	GB
This shows the maximum weight that can be measured by the scale.
[Example]
In the case of Maximum capacity 33lb (15kg), it can measure up to 33lb (15kg).

* One exceeding the weighing capacity cannot be measured.

•d

This shows the amount of one scale mark. In the case of a digital display, this shows the inter- val of the numeric value to change.

[Example]

In the case of Minimum Graduation 0.1oz (0 - 12lb) 0.2oz (12 - 33lb) or 2g (0 - 6kg) 5g (6 - 15kg) the display increases and decreases.

•Extend Minimum Graduation

Enables changing precision of measurements.

•Tare

The container, towel, blanket, etc., used when measuring weight is called “tare”.

To measure the net-weight after subtracting the weight of the tare is called "tare weighing."

<AC Adapter>

Model	AD-0920M
Input	120 VAC	60Hz
Output	9 VDC	200mA

To measure correctly

Do not measure at a place where the temperature fluctuates greatly.

Errors may be observed in the measured value. In the case to move to a place with a temperature difference of 36˚F (20˚C) or more, leave it before use for 2 hours or more after moving.

•Do not use cellular phones or microwave therapy equipment near this equipment. It may not measure correctly due to equipment malfunction.

6 7