Preparation for Use, When using the AC Adapter

WB-100MA-取説/04.01.27 04.1.28 9:12 AM ページ8

2.Preparation for Use

WLevel Adjustment

WPrepare Power Source

GB	(Remote Display Version)

Level Gauge

*Adjust the level by rotating the adjustable feet.

(Column Mounted Version)

For accurate measurement, place the unit on as flat a surface as possible and adjust the level with the adjustable feet so the bubble in the level gauge is in the center of the frame.

mCaution

Place the equipment on a level surface. If the equipment is not stable, for example because not all the feet are on a level surface, there is a risk that it will topple over and it will be impossible to obtain an accurate measurement.

aWhen using the AC Adapter

plug

Insert the cable plug for the AC Adapter into the DC jack on the side of the Display Box, and insert the AC Adapter plug into a 230V AC mains DC jack.

Then confirm the Pilot Lamp on the AC Adapter lights up.

mWarning

•To avoid electric shocks, do not insert and remove the plug with wet hands.

Level Gauge

*Adjust the level by rotating the adjustable feet.

WInstallation of the Equipment (Remote Display Version)

When using the stand

Please pull out the stand at the back of the display box.

When putting away the display box, please insert the stand in the slot on the back of the display box.

DC jack

Pilot Lamp

bWhen using dry cell batteries

Fixing Screws for the

Battery Compartment

Dry Cell

Batteries

Battery Compartment

mCaution

•Use only the AC adapter (MODEL: A30930G) specified. Using an AC Adapter other than that specified may cause malfunctions.

Unscrew the Fixing Screws for the Battery Compartment on the right side of the Display Box and pull out the Battery Compartment. Place dry cell batteries LR6 (AA) in the correct positions as instructed inside the Battery Compartment and fix the Battery Compartment with the Fixing Screws.

If is displayed on the Display, please replace all the six batteries LR6 (AA) with new ones.

appares when the battery voltage is lower than 6.5 V w10%.

m•Please change the batteries LR6 (AA) carefully to avoid dropping them on your feet.

①

②

③

When installing the display box on the wall

aScrew the wall-hanging screws into the wall (leave the screws protruding from the wall by 5

mm).

bInsert the screw heads in the holes on the back of the display box. c Pull down the display box securely into place.

m・If the Display Box is not fixed sufficiently, there is a danger that it may fall down. ・Avoid installing the Display Box in a place where users may step on or get caught

by the cable.

・Do not swing the Display Box by the cable.

•Ensure that the batteries are inserted with the correct polarity / . If the polarity is incorrect, then the batteries may leak and damage the equipment.