Blind-mount BM models come with a pre-fitted back can

4. PRODUCT FEATURE IDENTIFICATION:	5. ACCESSORIES:

Conduit/Cable Clamp

Euro Type Connector

Mounting Wings

Tuning Port

Each product is supplied with the following accessories as standard:

Screws for	C-Ring
mounting wings

Tile bridge kit

Note: A tile bridge kit must always be used when installing into suspended ceiling tiles

Rotary Switch

Fig 1.1: The blind-mount (BM) models come with a pre-fitted back can

Screws for mounting wings

Rotary Switch

Tuning Port

Grille				Cut-out template

Euro Type Connector

Paint Mask

Fig 1.2: A pre-install (PI) model shown without optional pre-install back can

Euro Type Plug	Euro Type Connector

Optional accessories:

Conduit Knock-out points	Plaster (Mud)	60W Transformer
Conduit Knock-out points


	Ring
Fig 1.3: Optional pre-install (PI) back can for PI models		NOTE: for use with CMS801 PI
		model in distributed lines without
		back-cans.

Note that the CMS801 PI model’s transformer is pre-attached to the CMS801 PI back can for easy install.