Tannoy TS12 manual

Trim/Gain control

XLR / 1/2” jack combination connector for balanced input

Digital input on / off

3-way switch (post 2 channel DAC) selects SPDIF stream channel to be decoded - Left/Right/Mono

Switch selection of 12dB/8ve 80Hz high pass filter for use with AV subwoofers

(on SPDIF input - post DAC) over -10dB /- 4dBu range. Ref: 0dBu (0.775V) input for full rated output

RCA input for SPDIF with 75 Ohm terminating impedance

2nd RCA for SPDIF output for slaving a stereo pair

10Activ-Assist™ DIP switches control LF alignment - mid/near/close field & half/quarter/eighth space compensation

10Activ-Assist™ DIP switches control mid band and HF shelving trim

DIP switch ‘flat’ setting shown on the back

panel artwork

SPEC NOTES : (1) +/- 3 dB, measured at 1m in an anechoic chamber.

(2) Peak SPL at mix position for 1 pair driven

Applications: (3) Average over specified bandwidth for half space environment

Home studios/composition

Project studios, users of PC/MAC DAW’s

Professional recording, broadcast, post production studios & editing suites