Tannoy TS12 manual Performance, Electronic System, Reveal 66D

PERFORMANCE		66D
Frequency response (1)		49Hz-51kHZ
Max SPL (2)		117dB
Distortion		<0.4%
Dispersion @-6dB, 10kHz, horizontal		90 degrees
DRIVE UNITS
Drive Units – LF/MID	2 x 165mm (61/2”) multi fibre
		paper pulp cone
WideBandTM HF	25mm (1”) titanium dome,
	neodymium magnet system.
ELECTRONIC SYSTEM
Inputs	600	balanced XLR/Jack,
		SPDIF RCA
SPDIF sampling rate		44.1 – 96kHz
Input Sensitivity (0dBu = 0.775mV)		-10dBu to +4dBu
	for a max SPL of 117dB
Amplifier output power		100W LF / 50W HF
Outputs	SPDIF slave out RCA
User Controls	Front panel mounted
	on/standby/mute switch,
	multi-function LED,

Rear panel mounted trim +6/-12dB, 80Hz high pass switch for AV use, 16-way Activ-AssistTMswitch array

Reveal 66D

Active centre channel reference monitor with Active-Assist™ Optimised bass-reflex loaded cabinet with 40mm thick front baffle

Two shielded 165mm (61/2”) woofers, multi fibre paper pulp cones

Shielded 25mm (1”) titanium dome neodymium tweeter WideBandTM HF extended to 51kHz corrects phase response Active bi-amplification (100W LF / 50W HF)

Putting together an active surround system? Look no further than the Reveal 66D as the ideal centre channel monitor.

With its extended WideBand™ response, the R66D preserves the harmonic structure of recorded music and vocals; this results in a more natural and accurate reproduction of the original source. Ready to integrate with your analogue or digital production environment the R66D includes Tannoy’s Activ-Assist™ equalisation technology.