Tannoy TS12 manual Reveal 8D

PERFORMANCE		8D
Frequency response (1)		46Hz-51kHz
Max SPL (2)		118dB
Distortion		<0.4%
Dispersion @-6dB, 10kHz, horizontal		90 degrees
DRIVE UNITS
Drive Units – LF/MID	200mm (8”) multi fibre
		paper pulp cone
WideBandTM HF	25mm (1”) titanium dome,
	neodymium magnet system.
ELECTRONIC SYSTEM
Inputs	600	balanced XLR/Jack,
		SPDIF RCA
SPDIF sampling rate		44.1 – 96kHz
Input Sensitivity (0dBu = 0.775mV)		-10dBu to +4dBu
	for a max SPL of 118dB
Amplifier output power		120W LF / 60W HF
Outputs	SPDIF slave out RCA
User Controls	Front panel mounted
	on/standby/mute switch,
	multi-function LED,

Rear panel mounted trim +6/-12dB, 80Hz high pass switch for AV use, 16-way Activ-AssistTMswitch array

Reveal 8D

High power active near field reference monitor with Activ-Assist™ Optimised bass-reflex loaded cabinet with 40mm thick front baffle Shielded 200mm (8”) multi fibre paper pulp cone woofer Shielded 25mm (1”) titanium dome neodymium tweeter WideBandTM HF extended to 51kHz corrects phase response Active bi-amplification (120W LF / 60W HF)

Tannoy Activ-Assist™ set-up software enabled

Get the big, deep low-frequency performance of an 200mm (8”) woofer with the same purity and articulation of the rest of the Reveal range with the R8D. Combining 180 Watts of bi-amplification, with Activ-Assist™ equalisation technology and an SPDIF digital input, the R8D is ready

for the most demanding applications. Classic Reveal performance with extended LF response and up to 118dB of power output makes the R8D the new standard for world-class nearfield monitoring applications.