Connecting the Mouse Receiver
To connect the mouse receiver:
1Turn off your computer.
2Plug the standard USB end of the cable into an available USB port on your computer.
You are now ready to install the device drivers for your operating system.
Installing the Device Drivers
NOTE: You must install the supplied device drivers to use the fourth and fifth buttons. Otherwise, the mouse will function as
astandard, three-button mouse.
To install the supplied device driver:
1Turn on your computer.
2Insert the driver software CD into your computer’s
3Click Start, Run, then enter D:\Setup.exe (where D: is the path of your
The Welcome screen appears.
4Click Next.
5Select Typical or Custom installation and then click Next.
6Click Yes.
7Click Finish to complete the driver installation and restart your computer.
Once your computer restarts, the mouse icon appears in the system tray.
You are now ready to install the battery in the mouse, set the radio frequency channel, and establish a communications link between the mouse and its receiver. See “Establishing a Communications Link” on page 6.
4
