Tascam CC-222MKII owner manual Features and controls-Rearpanel features, Rear panel features

2 – Features and controls—Rear panel features

MOPEN/CLOSE key Opens and closes the disc tray.

NDISPLAY key Changes the time display for the disc recording and playback.

OFINALIZE key Used when finalizing record- able discs.

PERASE key Used when erasing data from CD-RW discs.

QSYNC REC key Turns synchronized record- ing of the disc recorder on and off.

RMENU key Repeated presses of this key cycle through the different menu options.

SMULTI DIAL Used to select and confirm menu settings etc. (turn to make the setting, push to confirm), and also as a track search facility when playing back discs.

TDisc tray Open and close this tray with the OPENCLOSE key M to load and unload discs.

UREMOTE SENSOR window Receives the infra-red signals from the remote control unit. Do not block this window if you are using the remote control unit.

VPITCH CONTROL knob This is a center- detented knob which allows the tape speed (and therefore the pitch) to be changed by ±12%.

WREV MODE switch This three-position switch allows the choice of single-side or bidirec- tional playback and recording (Ä or Ê), or (ä) continuous playback only (not recording).

XDolby NR (OFF/ON) switch Use this switch to turn the Dolby noise reduction off and on for the cassette deck.

YCD-TAPE CONT PLAY switch Use this to turn continuous playback (alternating between disc and cassette) on and off.

ZCD TIMER (OFF/PLAY) switch Use this switch to turn the CD timer option on or off (when this is in the PLAY position, turning on the machine with a disc inserted will automatically start play- back).

aCD STOP key Stops CD playback or disc recording,

bCD PLAY key Starts CD playback or record- ing (from record ready mode).

cCD PAUSE key Pauses or unpauses CD playback or recording (starts recording from record pause mode).

dCD RECORD key places the disc in record ready mode and performs manual track incrementing while recording.

eMONITOR (TAPE/MIX/DISC) switch

This switch selects the source for the headphone out- puts as either the cassette deck (TAPE), the disc recorder (DISC), or a mixture of both (MIX).

fPHONES jack and volume control

Connect a standard pair of stereo headphones to this 1/4” jack, and adjust the level with the control.

Rear panel features

@ # $ %

The CC-222MKII line analog inputs and outputs all operate at the –10dBV level. For details of input and

^

output impedances, etc., consult the specifications.

TASCAM CC-222MKII Owner’s Manual 13