Tascam CC-222MKII CD player, Simple playback operations, Time display modes, Track search

4 – CD player

The CC-222MKII can be used to play back CDs (including CD-R and CD-RW discs that have been recorded and finalized on other types of recorder), as

well as CD-R discs and CD-RW discs that have been recorded on the unit.

Simple playback operations

1Press the OPEN/CLOSE key to open the disc tray.

2Discs should be inserted in the tray with the label uppermost.

3Press the OPEN/CLOSE key to close the tray again.

When a disc is loaded into the unit, the display briefly shows TOC Reading., with a flashing period following the word “Reading” as the unit determines the contents of the disc. When the TOC has been read, the display shows (at the left of the display) one of the following:

CD	A commercial pre-recorded CD or a
	finalized CD-R
CD-R, NO TOC	A CD-R which has yet to be finalized
CD-RW, NO TOC	A CD-RW which has yet to be finalized
CD-RW	A finalized CD-RW (this differs from a CD,
	as it may be unfinalized and erased)
[blank]	Unusable or unreadable disc or no disc

1Press the PLAY key to start playback.

2Press the STOP key to stop playback (note that no digital signal is output when playback is stopped).

3Press the PAUSE key to pause playback temporarily.

The track number indicators at the bottom of the dis- play light, to show the available unplayed tracks. If there are thirteen tracks on the disc, for example, indicators 1 through 13 will light. If there are more than 20 tracks on a disc, the track number OVER indi- cator (at the bottom of the display) will light.

Time display modes

When playing back a CD (or when in pause mode), there are four different time display modes.

In each mode, the current track number is given, fol- lowed by the time, as given below, e.g.

10Tr 0:48

Press the DISPLAY key to cycle through these time display modes, as described here:

Display shows	Meaning
TOTAL	Total elapsed time of the disc
[blank]	Elapsed time of the current track
TOTAL REMAIN	Time remaining of the current disc
REMAIN	Time remaining of the current track

NOTE

If programmed playback has been selected (“Pro- grammed order playback” on page 22), the elapsed time and total remaining time refer to the programmed material, not the whole disc.

Track search

Use the MULTI DIAL (or the SKIP keys on the remote control unit) to jump forward or backward by one track at a time, as shown on the display.

Note that going forward from the last track of the disc will “wrap round” to track 1, and going back- ward from the first track of the disc will “wrap round” to the last track of the disc.

The track number indicators at the bottom of the dis- play shows the selected track (the lit indicator at the left of the row of indicators).

It is also possible to use the number keys on the remote control unit to jump directly to a particular track:

1To play tracks 1 through 9, simply press the appropriate key (1 through 9).

TASCAM CC-222MKII Owner’s Manual 21