Tascam CC-222SL Display, dub, dub, A-B, A-B, line, disc, OVER, line, tape, TOTAL, phono, REMAIN, REPEAT, REPEAT, OPTICAL, COAXIAL

2 – Features of the CC-222SL

Display

* () Q W E RTYU

IOPSD F G H J K	L:ZX
A

This display shows various types of operation information, including CD disc information, deck operation modes, and menu status.

(Tape PLAY Lights when a tape is being played back or recording.

)˙/¥(Tape-running indicator) Shows the direction of a tape during playback or recording.

QTape pause (π) Lights when the unit is in standby mode for tape playback or recording.

WTape REC Lights during tape recording or recording standby mode.

ETape Counter display The tape counter value is incre- mented when the tape is moving from left to right, and decremented when it moves from right to left (See “Tape counter” on page 32 for more details).

RTape Level meter Displays the playback level and the input level of the source device for recording operation.

TTape, CD In the CD-TAPE CONT PLAY mode (con- tinuous CD/tape playback), on of these will flash during playback.

YINPUT 2 This is always displayed except when record- ing with the PHONO key.

ULINE 2, DISC display Shows the different sources available for INPUT 2 (Tape deck).

line 2: a signal source is connected to line input 2.

disc: a signal source is connected to internal CD drive.

IDUB 1, 2 When dubbing a tape to a CD-RW, the indica- tor “dub 1” lights up. When dubbing a CD-RW to a tape, indicator “dub 2” lights up.

OCounter display Either TOTAL or REMAIN is lit. When both indictors are off, the time mode is set to show the elapsed time of the current track.

PDisc information display no toc Lights when a disc does not contain TOC (Table of Contents) data. CD, CD-R or CD-RW lights up when a disc with TOC data is loaded.

ACD play (¥) Lights during disc playback.

SCD pause (π) Lights during playback or recording standby mode.

DCD REC Lights during disc recording or recording standby mode.

FSYNC Lights when the SYNC recording mode is on.

GRepeat, A-B display When the Repeat function is on, “REPEAT” is lit. When the A-B Repeat function is on, “REPEAT” and “A-B” are lit. “A-B” also blinks until a “B-point” is entered.

HSINGLE, RANDOM, PROGRAM display Depending on the playback mode selected. When all the indicators are off, Continuous playback mode is on.

JCharacter display Disc or track information, menu, message, time, and operation status are displayed.

KCD Level meter Displays the playback or input source level when recording.

LMUSIC CALENDER Available tracks for playback light up; played back tracks disappear from the screen. When there are more than 20 tracks available for playback, the “OVER” indicator lights up.

:A·Space Lights when the Auto Space function is on.

ZA·TRACK Lights when the Auto Track function is on. The indicator blinks when Time mode is selected.

XINPUT 1 This is always displayed except when record- ing with the PHONO key.

COPTICAL, COAXIAL, line 1, phono, tape display

Shows the different sources available for INPUT 1 (CD drive).

OPTICAL: Input source is connected to optical.

COAXIAL: Input source is connected to coaxial.

line 1: Input source is connected to line 1.

phono: Input source is connected to phono.

tape: Input source is connected to internal tape deck.

TASCAM CC-222SL 13