Tascam CC-222SL CAUTION, Optical pickup:

Safety Instructions

This product has been designed and manufactured according to FDA regulations "title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968", and is classified as a class 1 laser product. There is no hazardous invisible laser radiation during operation because invisible laser radiation emitted inside of this product is completely confined in the protective housings.

The label required in this regulation is shown at 1.

1	For USA

For China

CAUTION

•DO NOT REMOVE THE PROTECTIVE HOUSING USING A SCREWDRIVER.

•USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

•IF THIS PRODUCT DEVELOPS TROUBLE, CONTACT YOUR NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT USE THE PRODUCT IN ITS DAMAGED STATE.

•CLASS 1M INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.

Optical pickup:

Type: HOP-6201T

Manufacturer: Hitachi Media Electronics Co,Ltd.

Laser output: Less than 75 mW on the objective lens (record)

Wavelength: 777 to 787 nm

TASCAM CC-222SL

Contents

Page WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Page CAUTION Optical pickup: 1- Introduction 2 – Features of the CC-222SL 3 – Menu operation 4 – Disc operations 5 – Recording CDs Supplied accessories Rack-mountingthe unit Some notes, precautions and environmental considerations Beware of condensation Never use a stabilizer or printable discs Handling of compact discs About CD-Rand CD-RWdiscs About finalizing “Recordable” discs About tapes About this manual Use of the remote control unit Batteries Front panel Rear panel Display RC-222SLRemote control unit Menu operation Menu configuration Simple playback operations Time display modes Track search Playback modes Random playback Program playback Repeat playback A to B repeat playback Intro check Auto spacing Playing back MP3 files Directory playback setting Input selection Signal volume Input monitoring Sampling Frequency conversion Basic recording Time display while recording Playing back tracks Restricting the number of tracks Full disc Recording to disc from the RIAA PHONO inputs Dubbing from tape to disc Dubbing to CD from the middle of the tape Bypassing the INPUT level for dubbing Advanced recording Setting the trigger level Using the trigger level Synchronized recording Automatic track division Manually divide track Fade-inand fade-out Rec mute function Copy-protection Finalizing Unfinalizing CD-RWdiscs Erasing Erasing tracks Erasing a whole disc Refreshing a disc Playback operations Continuous tape/CD playback Recording operations Dubbing tapes from the CD deck Dubbing to tape from the middle of a CD Recording tapes from the PHONO deck Other recording features Recording silences between items Erasing tapes Other tape functions and features Tape counter Pitch control Search keys OUT2 setting (TAPE or AUTO) Error messages Messages displayed during normal operation Specifications CD recorder section Cassette recorder section Phono input and headphones General specifications Dimensional drawing