6 – Various Playback Functions

NOTE

The resume function on/off setting is retained even when the power is turned off.

NOTE

The incremental play function on/off setting is retained even when the power is turned off.

Call function

During playback or when paused, press the CALL [PLAY MODE] button on the player or the CALL button on the remote to locate to the point when playback last started and pause playback. However, when this function is used with a data CD, playback pauses at the beginning of the track that was playing when playback was last started.

Incremental play function

When the incremental play function is on, pressing the

ÁPLAY button on the remote during playback will start playback from the beginning of the next track, and pressing the ª(stop) [INTRO CHECK] button on the player or the ªSTOP button on the remote will pause playback at the beginning of the next track.

NOTE

•• When the incremental play function is on and playback is paused, pressing the ÁPLAY button on the remote will start playback from that point, and pressing the

ª(stop) [INTRO CHECK] button on the player or the

ªSTOP button on the remote stops playback.

•• During playback of the last track, if you press the Á PLAY button on the remote, playback of the first track will start. If you press the ª(stop) [INTRO CHECK] button on the player or the ªSTOP button on the remote, playback will pause at the beginning of the first track.

•• Setting the CD-500B control I/O parallel connector pin 13 (PLAY) to ON has the same effect.

•• Receiving a stop command from the CD-500B control I/O parallel connector pin 11 (FADER START/STOP) has the same effect.

To turn the incremental play function on/off, use the 11 Inc-Pmenu item (default value: OFF).

When the incremental play function is on, INCRappears in the lower part of the display.

Repeat playback

You can repeatedly play back all tracks or repeatedly play back a specified region within a track (A-B repeat playback).

Ordinary repeat playback

When the repeat playback function is on, behavior depends on the playback mode.

•• All track playback (ordinary playback) mode: the entire disc is played back repeatedly

•• Single track playback mode: the current track is played back repeatedly

•• Program playback mode: all the tracks in the program are played back repeatedly

•• Random playback mode: all the tracks on the disc are played back at random repeatedly

Use one of the following procedures to turn the repeat playback function on.

Using the front panel buttons:

When in shift mode (SHIFT indicator lit), press the Á [REPEAT] button. REPEATappears of the top of the display when repeat mode is activated.

Using the remote control:

Press the remote REPEAT button. REPEATappears of the top of the display when repeat mode is activated.

Use one of the following procedures to turn the repeat playback function off.

••

When the player is in shift mode (SHIFT indicator lit),

 

press the Á[REPEAT] button again until REPEAT

 

disappears from the top of the screen.

••

Press the REPEAT button on the remote until REPEAT

 

disappears from the top of the screen.

NOTE

The repeat playback setting is retained even when the power is turned off.

A-B repeat playback

You can specify a desired interval (A-B) within a track to be played back repeatedly. Use the following procedures to enable A-B repeat playback.

1During playback or when paused, when the player is in shift mode (SHIFT indicator lit), press and hold the Á[REPEAT] button on the player or press and hold the REPEAT button on the remote to activate A-B repeat mode. REPEATwill blink at the top of

TASCAM CD-500/500B 25