Changing the playback time display mode

You can select the playback time that is shown on the display.

During playback or when paused, press the DISPLAY [LOCK] button on the player or the DISPLAY button on the remote. Each press of the button cycles through the three types of time display. The currently selected display mode is shown in the playback time mode display area.

•• T.REMAIN: total remaining time is displayed

•• REMAIN: remaining time of the current track is displayed

•• Nothing: elapsed time of the current track is displayed

NOTE

•• When an audio CD is stopped, the total recording time is always shown regardless of whether or not T.REMAINor REMAINappears.

•• For data CDs, neither the total time when stopped, nor the remaining time or total remaining time during playback are shown. (Only the number of tracks or track number appears.)

•• In program playback mode, remaining time shows the time until playback of the program ends. In single playback mode, remaining time shows the remaining time in the track.

•• In program playback mode, the total time shown is for the program.

•• The playback time display mode setting is retained even when the power is turned off.

7 – Other Functions

reaches that point, the “:” in the time display will begin blinking.

MSF

Use the 10 EOMmenu item to set the value from among the following options.

Options: OFF, 5, 10, 15, 20, 25, 30(default value), 35

For values other than OFF, the number indicates the number of seconds before the end of the track that the warning begins. At the default value, the “:” begins to blink 30 seconds before the end of the track.

NOTE

The EOM function setting is retained even when the power is turned off.

Interval time setting

The player can be set to wait for a specified time (interval time) after completing playback of one track before starting playback of the next track.

To make the interval time setting, use the 16 INTVAL menu item.

1 Select the 16INTVALmenu item.

Frame time display setting

You can set whether or not the frame time is shown during playback. To set the frame time display, use the 17 FRAMmenu item (default value: ON).

NOTE

The frame time display on/off setting is retained even when the power is turned off.

End of track warning (EOM)

During audio CD playback, a warning indication can be shown on the display when nearing the end of a track. The end of track warning function does not work with data CDs.

By setting in advance the number of seconds before the track end that the warning is shown, when playback

2Press the PITCH [MENU] knob to enter interval time setting mode. The screen appears as follows.

3Turn the PITCH [MENU] knob to set the interval time, and press the PITCH [MENU] knob to confirm the setting.

Setting range: 0–5 minutes (10-second increments,

default value: 0 seconds)

NOTE

The interval time setting is retained even when the power is turned off.

TASCAM CD-500/500B 31