7 – Other Functions
Outputting in mono
This player can output analog and digital signals in mono.
To make the player output in mono, set the 08 Mono menu item to ON(default value: OFF).
When mono output is on, MONOappears at the bottom of the display.
NOTE
The mono output on/off setting is retained even when the power is turned off.
Controlling the player with a foot switch
You can connect a TASCAM
TASCAM
foot switch (sold separately)
Setting the foot switch
To set the foot switch, use the 18 REMOTmenu item to assign the functions to the switch controls (pedals).
Options: OFF, 1(default value), 2, 3, 4
Using the foot switch
When you press the controls (pedals) on the foot switch, they function according to the 18 REMOTsetting.
Foot switch mode settings
The functions of the controls in each mode are as follows.
|
| Footswitch controls | ||
|
|
|
|
|
MODE | L (brief press) |
| C (brief press) | R (brief press) |
|
|
|
|
|
| L (long press) |
| C (long press) | R (long press) |
|
|
|
|
|
1 | Â |
| PLAY/PAUSE | ¯ |
Ô |
| STOP | | |
|
| |||
2 | SKIP BACK |
| PLAY/PAUSE | CALL |
Ô |
| STOP | | |
|
| |||
| PITCH (−) |
| PLAY/PAUSE | PITCH (+) |
3 | PITCH (−) |
| STOP | PITCH (+) |
| continuous |
|
| continuous |
4 | PAUSE |
| PLAY | STOP |
– – – |
| – – – | – – – | |
|
| |||
Fader and event start
Fader start and stop
By connecting an external fader switch, the player can be started and stopped using a fader
ªª Using the CONTROL I/O START (RELAY IN) connector
|
|
| SLEEVE |
| CONTROL I/O | ||
|
|
|
| START | |||
STOP | (RELAY IN) CONNECTOR | ||||||
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
START
TIP SLEEVE TIP
Use a fader switch and
Then, set the 06 RELAYmenu item to FDR.
ªª Using the CONTROL I/O PARALLEL connector [CD-500B only]
Connect the fader switch and the
STOP | CONTROL I/O | |
PARALLEL | ||
| ||
| PIN 8 GND | |
START | PIN 11 | |
| FADER STRAT/STOP |
32 TASCAM