2Use the DIGITAL INPUT key [9] to select between the three possible digital audio sources: AES/EBU, COAXIAL and

OPTICAL.

It is assumed that the digital program material has been edited so that there is no clipping. If a digital signal goes over the maximum level, audible distor- tion occurs. It is not possible to adjust the level of digital audio signals input to the CD-RW5000.

If the program material which is to be recorded con- tains track divisions (PQ code or START IDs on a DAT) which you want to use as track divisions when making the CD, use the AUTO/MANUAL key [7] to set the track division mode to AUTO. See 4.3, "Automatic track division" for details.

4.2.1 Recording with synchronized start

The synchronized start facility allows recording to start when the digital start of a track is recognized (coaxial or optical) or when the input level from AES/EBU sources goes from below –36 dB to above this level.

There are two different ways in which the sync start facility can be used: you may wish to record only one track from a digital source—SYNC 1.

Alternatively, you may simply want to start recording when the source starts playing, and finish recording when the source stops—SYNC ALL.

Neither of these modes is available when recording from analog sources.

In both cases, it is possible to stop the recording manually at any time.

NOTE

The CD-RW5000 needs between 150ms and 400ms to recognize the start of a track. If the audio material starts too close (i.e. within this time) of the logical track start, the CD-RW5000 may not record the very first part of the audio material.

When recording using the sync start feature, therefore, make sure that there is a gap between the track start and the start of the audio. If there is not such a gap, you should use a manual start.

1If the audio source is not a CD connected dig- itally to the CD-RW5000, locate the audio source to a little before the start of the track

4 - Recording operations

you are recording and enter pause mode on the source player. If the audio source is a dig- itally-connected CD (coaxial or optical), make sure the CD player is stopped, not paused.

2Insert a recordable disc into the CD-RW5000.

To record one track only, press the SYNC START key once to show SYNC-1on the display.

To record more than one track, press the SYNC START key twice to show SYNC on the display.

The CD-RW5000 will go into record ready mode (the RECORD and PAUSE key indicators will both light, and the RECORD indicator will flash in the display).

3Start playing back the audio source.

If SYNC-1is selected and the source is input through the coaxial or optical inputs, recording starts automatically when the start of a track within the digital audio signal is detected, and continues until the start of the next track within the source material is detected, when recording will stop.

 

CD-RW5000

 

 

Record pause

 

Stop

 

Record

 

 

Track starts

 

 

 

 

 

 

 

 

 

 

Source material

In the case of SYNC-1 being selected, and the recorded signal being input through the AES/EBU inputs, recording will start when the audio level exceeds –36 dB. It will stop when the signal falls below this level for 20 consecutive seconds.

If SYNC ALL is selected, recording starts auto- matically when the start of a track within the digital audio signal at the optical or coaxial connector is destected, or when the audio level exceeds –36 dB at the AES/EBU connector.

When recording starts, the currently-recording track number is shown, together with the elapsed track time. To show how much recording time remains on the disc, press the DISPLAY key [6] or [34].

The recording may be stopped in either of the follow- ing ways:

SYNC-1

The start of the next track within the source mate- rial is detected.

TASCAM CD-RW5000 17

Page 17
Image 17
Tascam CD-RW5000 owner manual Recording with synchronized start, Optical

CD-RW5000 specifications

The Tascam CD-RW5000 is a professional-grade CD recorder and player, renowned for its robustness and versatility in music and audio production environments. Positioned as a reliable solution for both live performances and studio applications, the CD-RW5000 features a sleek design and an array of advanced technologies that cater to a variety of audio recording needs.

One of the primary features of the CD-RW5000 is its ability to record, play, and finalize CDs in both CD-R and CD-RW formats. This flexibility allows users to create audio CDs for distribution or for archival purposes. The device is equipped with high-quality A/D and D/A converters that ensure exceptional sound fidelity, capturing every nuance of the input signal and delivering a clear and detailed output.

The CD-RW5000 also boasts a range of connectivity options, including balanced analog XLR inputs and outputs, unbalanced RCA connectors, and digital inputs and outputs via both optical and coaxial connections. This makes it easy to integrate the unit into various audio setups, allowing users to connect microphones, mixers, and other audio equipment directly to the recorder.

Another standout feature is the built-in editing capabilities. The CD-RW5000 allows users to perform track segmentation, which means they can easily divide long recordings into individual tracks. Additionally, users can add Index points for easier navigation, making it a valuable tool for creating live recordings, interviews, and multi-track sessions.

The device’s ease of use is augmented by its straightforward user interface and bright LCD display, which provides clear information on track status and recording settings. The front panel includes dedicated buttons for functions like repeat, program, and shuffle, allowing for seamless operation during playback and recording sessions.

Tascam also incorporates a range of advanced features to enhance the user experience, such as pitch control and a fader start function, allowing for synchronized playback with compatible equipment. The inclusion of a remote control also adds an extra layer of convenience, making it easier to operate the device from a distance.

In summary, the Tascam CD-RW5000 stands out as a versatile and reliable CD recorder with a wealth of features designed to meet the demands of professionals in the audio industry. Its robust construction, exceptional sound quality, and ease of use make it a preferred choice for those looking to capture high-quality audio in various settings, whether on stage or in the studio.