Before you start recording using the CD-RW700, make sure that you understand the following key points:

Once you have recorded on a CD-R disc, the data cannot be erased from it.

You can add tracks to an unfinalized recordable disc. Once finalized, a CD-R disc is “fixed” and behaves in the same way as a pre-recorded disc. Finalized CD-RW discs, however, can be erased, refreshed and re-recorded.

4.1 Input selection

To select the input to be recorded, press the INPUT SELECT key on the main unit 6.

Repeated presses of the key cycle through the follow- ing options:

Analog In

Analog in

 

 

Optical In

Optical digital in

 

 

Coaxial In

Coaxial digital in

 

 

Opt +Analog

Optical digital and analog,

 

mixed

 

 

Coax +Analog

Coaxial digital and analog,

 

mixed

 

 

In the case of either the coaxial or optical inputs being selected, either alone, or together with the ana- log inputs, the boxed DIGITAL indicator shows on the display, and the appropriate indicator: COAXIAL or OPTICAL, lights on the display.

If the analog signal is selected, either alone, or together with either of the digital inputs, the boxed ANALOG indicator lights on the display.

4.1.1Signal volume

The signals from either of the digital inputs (coaxial or optical) can be mixed with the signals from the analog inputs. The signal path is as follows (this description applies, no matter how many inputs are being mixed):

The analog signals received at the ANALOG IN

jacks are controlled with the REC LEVEL controls

E.

Any input analog signals are then mixed with the

digital signals received at either the COAXIAL or OPTICAL IN (P or Q). If analog and digital sig-

4 - Recording

nals are being mixed, the digital signals are attenu- ated by 12 dB. The level of the analog/digital mix is then controlled using the digital volume menu, as described below.

1Press the RECORD key (K or E) to place the unit in record ready mode.

2Repeatedly press the MENU key (9 or 7) until the display shows VOLUME XXXdB where XXX is the current setting.

3Use the MULTI JOG control B or the SKIP keys I to adjust the input volume between - 60dB and +18db (relative to the original input level). There is also a ----setting which represents a complete signal cut.

NOTE

If digital direct is selected, as described below (4.3.4, “Digital direct”), the digital volume is bypassed and the menu item does not appear.

4.1.2Input monitoring

When the unit is in record ready, or record mode, the input signal is output from the OUT jacks (digital and analog), allowing you to hear the input signal.

The meters also show the current signal level.

However, it is only possible to record, or to enter record ready mode, when a recordable disc is inserted. To allow monitoring of the input signal at other times, or when the unit is stopped, use the MONITOR key on the remote control unit A.

The RECORD key K on the main unit will also enter monitor mode from stop mode when there is no recordable disc in the unit (when there is a record- able disc in the unit, pressing the RECORD key enters record ready mode).

The word MONITOR appears on the display to show that the output signal is an echo of the input signal(s). The meters show the current input level.

Exit the monitor mode by using the STOP key.

4.1.3Frequency conversion

The sampling frequency for CDs is 44.1 kHz. The CD-RW700 will always record (and play back) CDs at this frequency.

However, if recording through a digital connection (either coaxial or optical) and the source has been recorded at a frequency other than 44.1 kHz, or is being played back at a non-standard speed using a varispeed unit (more than 1% away from the stan- dard), the CD-RW700’s internal frequency converter

TASCAM CD-RW700 17

Page 17
Image 17
Tascam CD-RW700 owner manual Recording, Input selection, Signal volume, Input monitoring, Frequency conversion

CD-RW700 specifications

The Tascam CD-RW700 is a professional-grade audio CD recorder designed for serious musicians, sound engineers, and audio enthusiasts. With a robust build quality and a multitude of features, this unit is well-suited for both studio and live settings.

One of the standout features of the CD-RW700 is its ability to record, erase, and re-record on CD-R and CD-RW media. This flexibility allows users to create high-quality CDs for various applications, from music albums to archival projects. The CD-RW700 employs a sophisticated digital-to-analog converter, ensuring pristine sound quality during playback and recording.

The unit supports a variety of recording formats, including CD-DA, WAV, and MP3, catering to different audio needs. The high-speed dubbing function allows for rapid copying of CDs, making it ideal for situations where time is of the essence. Additionally, the device features a high-quality pitch control and signal processing function, enabling users to adjust the pitch and tempo of recordings with ease.

Equipped with a clear LCD display, the CD-RW700 provides users with real-time feedback on recording levels, time elapsed, and remaining time. This user-friendly interface enhances the overall experience, allowing for straightforward navigation and operation. The built-in metronome and tuner serve as useful tools for musicians during recording sessions.

Connectivity is another strong point of the CD-RW700. It features balanced XLR inputs and outputs, as well as unbalanced RCA connections, ensuring compatibility with a wide range of audio equipment. The inclusion of a coaxial digital input and output further enhances its versatility, allowing for high-quality digital transfers.

The CD-RW700 also supports various anti-shock technologies, ensuring smooth playback without interruptions during live performances or sensitive recordings. This reliability makes it an excellent choice for both professional studios and home setups.

In conclusion, the Tascam CD-RW700 combines advanced recording technologies with comprehensive features, making it an essential tool for anyone looking to produce high-quality audio CDs. Its robust design, user-friendly interface, and versatile connectivity options position it as a leading choice in the realm of CD recording equipment. Whether you’re a musician, producer, or sound technician, the Tascam CD-RW700 offers the reliability and performance needed to meet demanding audio requirements.