3 − Playback

Playback 2 (either TAPE 1 or TAPE 2)

D. Tape counter

Press the COUNTER RESET key to reset the tape counter to 0000. You can use this function for easy relocation of any desired point on the tape.

A. To stop playback, press the STOP key (ª).

B.To stop playback temporarily, press the PAUSE key. To resume playback, press the PAUSE key again, or press the PLAY key (˙ or ¥).

While playback is paused, pressing the PLAY key whose direction is opposite to the indicator (˙ or ¥) on the display, will switch the playback direc- tion. This does not release the pause function.

Press PAUSE or the same play key (˙ or ¥) again to start playback on the other side of the tape.

C.Fast forward/RewindPress the Ô or , key while in stop mode to fast wind the tape.To stop the fast winding tape, press the STOP key (ª).
E.Pitch control (TAPE 1 deck only)

This control varies the pitch of the music dur- ing playback (This control does not work dur- ing recording or dubbing).

Turning the PITCH CONTROL knob clockwise increases the playback speed and raises the pitch up to +10%.

Turning the PITCH CONTROL knob counter- clockwise reduces the playback speed and lowers the pitch by a maximum of –10%.

F.To listen through headphones

WARNING

There is no level control for the headphones output. Beware that sudden loud sounds may occur depending on recorded material. You should avoid prolonged exposure to high volume sound as this can damage your hearing.

Plug your headphones into the PHONES jack, and put on the headphones.Plugging into the PHONES jack does not disable the line outputs.

TASCAM 202MKIV 13