Tascam D00935220B Parallel recording, 5Start recording, A.To stop recording, 4.Check the recording direction, Press the STOP key (ª) of the deck which is currently recording

4.Check the recording direction.

If an indicator is lit which points in the direction opposite to the one desired, change the direction by pressing the opposite direction play key (˙ or ¥).

NOTE

Be careful not to press play key whose arrow points in the same direction as the indicator. Doing so will start recording.

Recording is done in this order:

TAPE 1	Side “A”
	≈
	Side “B”
	≈
TAPE 2	Side “A”
	≈
	Side “B”

You can start recording from side “B” of TAPE

1.But if you do so, side “A” of this tape is not recorded: when recording reaches the end of side “B”, the TAPE 2 deck starts recording.

4 − Recording

NOTE

The TAPE 2 deck always starts recording from side “A”.

5Start recording.

Recording starts when you press the PAUSE key or the play key whose arrow points in the same direction as the indicator on the TAPE 1 deck.

When recording is finished on the TAPE 1 deck, the TAPE 2 deck automatically starts recording.

NOTE

The transition from TAPE 1 to TAPE 2 takes several seconds.

A.To stop recordingPress the STOP key (ª) of the deck which is currently recording.

Parallel recording

This function allows you to record the same material simultaneously on both TAPE 1 and TAPE 2.

Load tapes into both decks and press the PARALLEL REC key to start recording.

Before starting recording, check and correct the following by performing steps 1 – 7 on page 16 such as Record direction, Reverse mode setting, Dolby NR setting, Recording level, etc.

When everything is ready, get back into stop mode if the deck is in another mode.

During parallel recording, the PARALLEL indicator is lit on the display.During parallel recording, only the following keys work:TAEP I deck: STOPTAPE 2 deck: PAUSE, REC MUTE, STOPPressing the STOP key (ª) on either deck stops both tapes at once.

TASCAM 202MKIV 21