Tascam US-122L owner manual Connections, USB connections, Audio connections

5 – Connections

USB connections

Using the included cable, connect the US-122L to your computer as shown in the illustration.

Computer

NOTE

Some USB devices access the USB bus frequently. To avoid dropouts and clicks in the audio signal, we strongly recom- mend that you do not connect other USB devices to the USB bus used by the US-122L.

USB keyboards and mice are exceptions to this, and will probably not cause problems.

USB

Audio connections

Connect the output signal of your mic, gui- tar, keyboard, or other audio device to the US-122L, where it will be converted into digital audio and sent via USB to your computer. Connect the output of the US-122L to your speakers (via an amp) or headphones, so you will be able to monitor the audio signals coming into the US-122L or being produced by your computer.

NOTE

The US-122L has two input channels (L, R), with a MIC IN jack (XLR) and LINE IN jack (1/4” phone jack) provided for each channel. Do not connect signals to both of these analog input jacks at the same time. If both are connected, the signal will not be correctly input to the US-122L.

Mic

Connect your mics to the MIC IN (L, R) jacks (XLR). If you are using a condenser mic that requires phantom power, turn on the phantom power.

If you're using a condenser mic

14 TASCAM US-122L