In some cases, Add Hardware Wizard may ask for the file "US224WDM.SYS". Should this occur, click Browse and direct it to the path Windows/System32/Drivers.
In some cases, Add Hardware Wizard may ask for your Win98
The Setup Complete dialog will appear. Click "Yes, I want to restart my computer", followed by the Finish button. The computer will reboot.
Connect the
The drivers are now installed and the US- 224 is ready to operate.
To install under Win2K or Windows XP:
Note: Run the Installer with
Double click on the executable file
“US224_Win2k_Install_1_10.exe”. (The
Click the "Setup" button. The Welcome dialog box will appear.
Click the "Next" button. The driver files will be installed to your hard drive.
NOTE: You may be prompted by a message informing you that the software you are about to install does not have a digital certificate. Simply click “Continue the installation anyway” and proceed.
If you are prompted to restart your computer, do so.
Connect the
wizard, which will find the three needed files on its own. This will take about 30- 60 seconds.
The drivers are now installed and the US- 224 is ready to operate.
To install using Windows New Hardware Wizard:
Unzip the driver files into a new (empty) folder on the hard disk.
Connect the
The Windows
Choose "Search for a suitable driver for my device" and press Next
Enter the path where the drivers are stored and press OK
After Windows finds the "firmware download" driver, click Next
Click "Finish" · The other driver components will be automatically discovered and loaded
Click "Finish" if prompted, and reboot if prompted
Illustration 3.02 - Windows 98 New Hardware Wizard
13
