Temperature Alert
Your Wireless Rain Gauge has a temperature alert feature. When either the indoor or outdoor temperature exceeds the high or low
To Set a High/Low Temperature Alert:
1.Press and hold “ALERT” until the alert, up arrow and “IN” icons appear and the alert temperature digits flash.
2.Press “UP” or “DOWN” to change the indoor alert temperature high limit digits.
3.Press “ALERT” to select the displayed temperature high limit.
4.Press “ALERT” again to begin setting the indoor temperature low limit digits. The display will show a down arrow instead of an up arrow.
5.Press “UP” or “DOWN” to change the indoor alert temperature low limit digits.
6.Press “ALERT” to select the displayed temperature low limit.
7.Press “ALERT” again to begin setting the outdoor temperature high limit digits. The display will show an “OUT” icon instead of an “IN” icon and an up arrow instead of a down arrow.
8.Press “UP” or “DOWN” to change the outdoor alert temperature high limit digits.
9.Press “ALERT” to select the displayed temperature high limit.
10.Press “ALERT” again to begin setting the outdoor temperature low limit digits. The display will show a down arrow instead of an up arrow.
11.Press “UP” or “DOWN” to change the outdoor alert temperature low limit digits.
12.Press “ALERT” to select the displayed temperature low limit.
13.Press “ALERT” a final time to confirm the temperature limits. The limits are set.
NOTE: The temperature limit increments are 1.8°F (1.0°C).
To View a High/Low Temperature Alert
1.Press “ALERT” after setting the temperature alert limits (see previous section). The “ALERT” icon will appear.
2.An alarm will sound when a temperature is higher or lower than the set temperature limit. Press “ALERT” to stop the alarm. The alert icon will stop flashing. The arrow icon will continue to flash to indicate the set high/low temperature limit is too high or low.
3.The alarm will sound again if the set high/low temperature falls back within the high/low limit.
4.To deactivate the alarm, press “ALERT” until the alert icon disappears.
Low Battery Indicator
A “ 
“ with the “IN” icon indicates the batteries on the indoor base unit are running low and should soon be replaced.
A “ 
“ with the “OUT” icon indicates the batteries on the outdoor rain collection cup sensor are running low and should soon be replaced.
Trouble-Shooting
Disconnected Signals
If the receiver unit does not receive a transmission from a remote channel for 1 hour, the display will show dashes. To correct this problem:
1.Check that the rain gauge collection cup is properly positioned, within the appropriate transmission range. Transmissions are vastly affected by building materials and where the base unit and rain collection cup are positioned. Try various set ups for the best results. Shorten the distance between base unit and rain collection cup units when necessary.
2.Check to make sure the transmission path is clear of obstacles and interference.
3.If new batteries are faulty on the initial installation, install fresh batteries. Low Battery Icon will warn you if the base unit or rain cup collector batteries have lost their charge. Replace the batteries when necessary.
4.Press
7
