24 Models C810 & C812Operating Procedures
Step 34
C810: Press the STANDBY button to lower the
center platen.
C812: Press the STANDBY button to lower one of
the platens, if needed.
Step 35
C810: With a clean, wet cloth, rinse both sides of the
center platen.
Step 36
With a clean, wet cloth, rinse the inner edges of the
right and left platens.
Step 37
Press the RAISE button to raise the lowered platen.
Step 38
With a clean, wet cloth, wipe the exterior of all the
platens, especially behind the rear of the upper
platens (next to the arm assembly).
Step 39
Starting at the back of the lower grill, spread the
remaining grill cleaner over the entire surface. Do
not scrub while applying product.
Step 40
Lightly scrub the surface with the non-abrasive pad
until all soil has been liquified by the grill cleaner.
Figure 50
Note: The rear of the upper platen, as well as the
tubular arm, can easily be wiped from the front of the
unit. If cleaning is performed on a daily basis, there
should be no carbon build-up.
IMPORTANT!
DO NOT use a jet of water to clean or rinse
the grill.
DO NOT use cold water or ice to cool the
upper platen or the lower cook surface.
Failure to follow these instructions may result in:
Sserious electrical shock
Sburns from hot steam
Sliquid collecting inside the grill and
destroying electrical components
Sdamaged cook surfaces
Step 41
Carefully pour warm water on the lower grill surface,
starting from the back to the front. Use the squeegee
to remove the cleaner from the grill surface.
Figure 51