25
Models C810 & C812 Operating Procedures
To avoid damaging the grill:
SNever use grill screens on the upper platen
or the lower grill surface.
SNever use any abrasives or cleaners other
than the approved cleaner.
SNever allow the grill scraper or the abrasive
cleaning materials to come in contact with
the release material.
Step 42
Pour a small amount of lukewarm water on a clean,
wet cloth over the bottom grill surface and wipe off
the residue.
Figure 52
Step 43
Wipe the lower grill surface with a clean, wet cloth.
Repeat until no visible soil remains.
Step 44
On a clean, sanitized, flat surface next to the sink,
clean both sides of the release material sheets by
gently wiping them with a clean, sanitized cloth.
Step 45
Place the release material sheets on a clean,
sanitized, flat surface to air dry overnight.
Step 46
Remove and empty the grease cans.
Figure 53
Step 47
Wash, rinse, and reinstall the grease cans.
24 Hour Stores Only:Step 48
Re-install the release material sheets on the
opposite side than previously used. Secure the
sheets with the release material clips and retainers.
Start up the grill per instructions starting on page 10.
Figure 54