Taylor CONROE1333-DVI/H user manual CPU Configuration

BIOS SETUP UTILITY

Main Advanced H/W Monitor Boot Security Exit

Advanced Settings

WARNING : Setting wrong values in below sections may cause system to malfunction.

CPU Configuration

Chipset Configuration

ACPI Configuration

IDE Configuration

PCIPnP Configuration

Floppy Configuration

SuperIO Configuration

USB Configuration

Configure CPU

	Select Screen
	Select Item
Enter	Go to Sub Screen
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

Setting wrong values in this section may cause the system to malfunction.

3.3.1 CPU Configuration

BIOS SETUP UTILITY

Advanced

CPU Configuration

Overclock Mode	[Auto]
CPU Frequency (MHz)	[133]
PCIE Frequency (MHz)	[100]
Boot Failure Guard	[Enabled]
Spread Spectrum	[Auto]
Ratio Actual Value	9
Enhance Halt State	[Disabled]
Max CPUID Value Limit	[Disabled]
Intel (R) Virtualization tech.	[Enabled]
CPU Thermal Throttling	[Enabled]
No-Excute Memory Protection	[Disabled]
Hyper Threading Technology	[Enabled]
Intel (R) SpeedStep(tm) tech.	[Auto]

Select the over clock mode.

	Select Screen
	Select Item
+-	Change Option
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

Overclock Mode

Use this to select Overclock Mode. The default value is [Auto]. Cnfiguration options: [Auto], [CPU, PCIE, Sync.] and [CPU, PCIE, Async.].

CPU Frequency (MHz)

Use this option to adjust CPU frequency. The default value is [133].

PCIE Frequency (MHz)

Use this option to adjust PCIE frequency. The default value is [100].

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Spread Spectrum

This item should always be [Auto] for better system stability.

3 0