Taylor CONROE1333-DVI/H ATA/IDE Configuration, Combined Option, IDE Device Configuration

3.3.4 IDE Configuration

BIOS SETUP UTILITY

Advanced

IDE Configuration

ATA/IDE Configuration	[Enhanced]
SATAII 1	[Hard Disk]
SATAII 2	[Not Detected]
SATAII 3	[Not Detected]
SATAII 4	[Not Detected]
IDE1 Master	[ATAPI CDROM]
IDE1 Slave	[Not Detected]

Set [Compatible] when Legacy OS (MS-DOS, Win NT) device is used.

Set [Enhanced] when Native OS (Win2000 / XP) is used.

	Select Screen
	Select Item
+-	Change Option
F1	General Help
F9	Load Defaults
F10	Save and Exit
ESC	Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

ATA/IDE Configuration

Please select [Compatible] when you install legacy OS (Windows NT). If native OS (Windows 2000 / XP) is installed, please select [Enhanced].

When [Compatible] is selected

Combined Option

It allows you to select between [SATA 1, SATA 2, SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], and [IDE 1, SATA 2, SATA 4]. If it is set to [SATA 1, SATA 3, IDE 1], then SATAII_2, SATAII_4 will not work. Likewise, if it is set to [IDE 1, SATA 2, SATA 4], then SATAII_1, SATAII_3 will not work.

Because Intel® ICH7 south bridge only supports four IDE devices under legacy OS (Windows NT), you have to choose [SATA 1, SATA 2, SATA 3, SATA 4], [SATA 1, SATA 3, IDE 1], or [IDE 1, SATA 2, SATA 4] when the installed device is used with legacy OS.

	[SATA 1, SATA 2,	[SATA 1, SATA 3,	[IDE 1, SATA 2,
	SATA 3, SATA 4]	IDE 1]	SATA 4]
Master	SATAII 1, SATAII 2	SATAII 1	SATAII 2
Slave	SATAII 3, SATAII 4	SATAII 3	SATAII 4

IDE Device Configuration

You may set the IDE configuration for the device that you specify. We will use the “Primary IDE Master” as the example in the following instruction.

3 6