UTILITY
33
Copy
Select whether you want to copy from User bank to card or from
card to User bank.
Execute Copy
Select this parameter and press Enter twice to carry out the copy
action.
The MIDI page
Basic Channel
The basic MIDI channel of the Gold Channel. This is the channel
that you should transmit Program changes on to change Presets in
the Gold Channel.
NOTE:The Gold Channel outputs the on/off status of the blocks
at Preset change.
Program change
This parameter enables or disables MIDI program changes on the
Gold Channel. When set to Enabled the Gold Channel will
respond to program changes incoming on the “Basic Channel”.
Bank Selection
This function is a new MIDI standard, making it possible to
Recall Presets above #128. This parameter determines whether
the Gold Channel should respond to this message or not. If your
MIDI device is capable of using this function, you should select
Fine or Coarse.
(Please refer to your MIDI device’s owners manual to make sure
which type the current product is using).
Sysex Device ID
The System exclusive ID of the Gold Channel. This is used when
performing bulk dumps to and from the Gold Channel.
Program Change Offset
With this parameter you are able to add to or subtract from the
incoming Program change: e.g. the incoming Program change is
Preset 79, and the offset is set to +1, the Program change will
now be 80.
Mapping Mode
Sets which bank incoming program changes should be sent to:
ROM (Factory), USER, CARD or Custom. This means that you
can guide all incoming Program changes to any of the three
banks, or you can design your own Custom MIDI map.
Custom Map
In the Custom Map you can decide what every incoming
Program change should map to, using the “Map Program Change
No.” and the “Into Preset” parameters
Map Program Change No.
Use this parameter to select the Program change number you
want to remap.
Into Preset
Use this parameter to set the new destination of the selected
program change number.
Reset Custom Map
Place the cursor on this parameter and press Enter to Reset the
Custom map.
MIDI Bulk Dump
You can back up the User presets of the Gold Channel to another
Gold Channel or to MIDI recording device using these functions.
NOTE: Transmitter and receiver must have same Sysex ID.
User Bank to MIDI
Connect your Gold Channel’s MIDI Out to another Gold
Channel, a sequencer or any other MIDI recordable device. Press
Enter twice and the Gold Channel will perform a MIDI bulk
dump of all User presets.
MIDI to User Bank
Connect the storage device to the Gold Channel’s MIDI In and
press Enter. The Gold Channel is now ready to receive a MIDI
bulk dump containing User presets.
WARNING: This action will overwrite ALL existing User presets
in the Gold Channel.
MIDI Controller map for Software 1.07 or higher.
cc10 Input Channel 1 Mute , 0..63 Unmute, 64..127 Mute
cc11 Input Channel 2 Mute , 0..63 Unmute, 64..127 Mute
cc12 Input Channel 1 OutLevel, 0..127 Maps to -31dB to +6dB
cc13 Input Channel 2 OutLevel, 0..127 Maps to -31dB to +6dB
Above controllers are receive only, they are not send to MIDI out
on the Gold Channel.