TC electronic SDN BHD NDY-1 user manual Setup Example PRE & Post Processing

SETUP EXAMPLE: PRE & POST PROCESSING

In this example, we are using the two engines of NOVA Dynamics in two different places in a signal chain. One engine is used in front of the pre-amp for compression, while the other is being used in the effects-loop as a noise gate.

• Connect your guitar to input A of the NOVA Dynamics.

• Connect output A of the NOVA Dynamics to the amp’s regular input.

• Connect the “Send” jack of the effect loop to input B of the NOVA Dynamics.

• Connect output B of the NOVA Dynamics to the “Return” jack of the effects loop.

Note: For best signal to noise ratio, calibrate the pedal according to the level of the input signal. You will love the fact that each engine of the NOVA Dynamics has its own individual level calibration. For further information, refer to this manual’s “Calibration” section.

7