SETUP EXAMPLE: MONO + DUAL PROCESSING
In this setup, the two engines can be used individually or serially. You can use two compressors, two noise gates, or one of each at the same time.
• Connect your guitar to input A of the NOVA Dynamics.
• Connect output A of the NOVA Dynamics to the input of your guitar amp.
• Activate engine A and/or B and select the desired compression type and/or noise gate algorithm.
• That’s all!
Note: For best signal to noise ratio, calibrate the pedal according to the level of the input signal. For further information, refer to this manual’s “Calibration” section.
5
