Release
Range: 0 – 500ms
Sets the Release time (= Decay) of the Reverb Envelope. This is the time the reverb tail needs to disappear and this is what causes the “gated” effect. For a typical eight- ies style response, Release should be set at
Max. range for this parameter depends on the Attack and Hold settings.
Envelope Display
ENVELOPE DISPLAY
The Envelope display is a graphical representation of the 4 envelope parameters and the wet level. The 4 dotted lines represent the 4 envelope parameters and their posi- tion in time. Take a vertical line at the handle and move it to the left to decrease the time for that parameter or to the right to increase the parameter. Moving the horizon- tal line of the envelope curve up and down changes the wet level of the reverb from 0dB (fully up) to off (fully down).
Note: The total time for Attack, Hold and Release can not exceed 500ms!
E N G L I S H
NonLin2 / 9
