TDK iEA Series manual 12/41

Data Sheet: Belleta® iEA Series –Single Output Eighth Brick

Electrical Characteristics (continued):

iEA48015A050V-000 through -015: 5V, 15A Output

	5.05
(V)	5.04
	5.03
Voltage	5.02
	5.01
	5
	4.99
Output
	4.98
	4.97
	4.96
	4.95
	1	2.4	3.8	5.2	6.6	8	9.4	10.8	12.2	13.6	15

Output Current (A)

Vin = 36V Vin = 48V Vin = 75V

iEA48015A050V-000 Typical Output Voltage vs. Load Current at Ta = 25 degrees

iEA48015A050V-001 Typical startup characteristic from on/off at full load. Ch4 - on/off signal, Ch 1 – output voltage

iEA48015A050V-000 Typical Output voltage response to load step from 50% to 75% of full load with output current slew rate of 0.1A/uS.

iEA48015A050V-000 Typical Output voltage response to load step from 50% to 75% of full load with output current slew rate of 0.1A/uS and 5000uF load.

	%		Trim		%				Trim Up
			Down
	Change				Change				Resistor
			Resistor
	of Vout				of Vout				(Kohm)
			(Kohm)
-5%			91.8K		+5%				325K
-10%			40.8K		+10%				168K
e.g. trim up 5%
		5.1 × 5⋅(100 + 5)			510		
	Rup :=			−		− 10.2		⋅K
			1.225× 5		5		

iEA48015A050V-000 Calculated resistor values for output voltage adjustment

©2004 TDK Innoveta® Inc.		￿ (877) 498-0099
iEAFullDatasheet 032707 3/29/2007	Revision 2.0	12/41