Teac CD-H750, Compact Disc Player ENGLISH, Maintenance, WHEN MOVING THIS UNIT, Read this before operation, DO NOT MOVE THE UNIT DURING PLAYBACK, get the best performance from this unit

Contents

Thank you for choosing TEAC. Read this manual carefully to

get the best performance from this unit.
Before use. . . . .	. .	. . . . . . . . . . . . .		. . . . . . . .				5
Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .							.	6
MP3 and WMA. . . . . . . . . . . . . . . . . . . . . . . . .							.	7
Using an iPod/iPhone. .			. . . . . . . . . . . . . . . . . . .			.		.7
USB flash drives .		. . . . . . . . . . . . . . . . . . . . . . .				.		.7
Connections . .	. . . . . . . . . . . . . . . . . . . . . . . .						.	8
Part names (main unit) . .			. . . . . . . . . . . . . . . . . . .				.	9
Part names (remote control).. . . . . . . . . . . . . . . . . .							10
Remote control unit. . . . . . . . . . . . . . . . . . . . . .						. 11
About the ErP. . . . . . . . . . . . . . . . . . . . . . . . .						.	12
Basic operation.. . . . . . . . . . . . . . . . . . . . . . . .							13
Listening to a CD. . . . . . . . . . . . . . . . . . . . . . . .							14
Listening to files on a USB flash drive . .					. . . . . . . . . . . .		15
Listening to an iPod/iPhone. . . . . . . . . . . . . . . . . .						. 16
Playback (1). .	. . . . . . . . . . . . . . . . . . . . . . . . . 16
Programmed playback (1). . . . . . . . . . . . . . . . . . .						. 19
Shuffle playback.. . . . . . . . . . . . . . . . . . . . . . . .							21
Repeat playback.		. . . . . . . .	. . . . . .	. . . . . . . .	.		22
Time .. . . . . . . . . . . . . . . . . . . . . . . .				. . . . .			23
Display (1).. . . . . . . . . . . . . . . . . . . . . . . . . . .							23
Before recording .. . . . . . .			. . . . . . . . . . . . .		. . .		24
Setting the Recoding Mode . .				. . . . . . . . . . . . . . . .		. 25
Recording to a USB flash drive. . . . . . . . . . . . . . . . .						. 26
Deleting a file from a USB flash drive.. . . . . . . . . . . . . .							27
Restoring factory settings. . . . . . . . . . . . . . .					. . . .		27
Troubleshooting .		. . . . . . . . . . . . . . . . . . . . . . .					28
Specifications .	.	. . . . . . . . . . . . . . . . . . . . . . .				.	29

Before use

	Read this before operation
	< Avoid placing the unit in direct sunlight or close to any source of
	heat, such as radiators, heaters, open fireplaces, amplifiers, etc.
	Also avoid locations that are subject to vibrations or exposed to
	excessive dust, cold or moisture.
	< Place the unit in a stable location near the audio system that you
	will use.
	< Do not move the unit during playback.
	< During playback, the disc rotates at high speed. Do not lift or move
	the unit during playback. Doing so may damage the disc or the
	unit.
	< Be careful to avoid injury when moving the unit due to its weight.
	Get someone to help you if necessary.
	< The voltage supplied to the unit should match the voltage as
	printed on the rear panel. If you are in any doubt regarding this

	matter, consult an electrician.	ENGLISH
	< As the unit could become warm during operation, always leave
	sufficient space around it for ventilation. When placing this unit,

	position it so that it is at least 30 cm (12" ) from walls and other
	devices in order to allow good heat dissipation. When installing
	it in a rack, leave at least 30 cm (12") open above and behind the

	unit.
	< Do not open the cabinet as this might result in damage to the
	circuitry or cause electric shock. If a foreign object should get into
	the unit, contact your dealer or service company.
	< When removing the power plug from the wall outlet, always pull
	directly on the plug, never yank on the cord.
	< Always remove the disc before relocating or moving this unit.
	Moving the unit with a disc inside could cause a malfunction.
	< Depending on the electromagnetic waves of television broadcasts,
	interference might appear on television screens when this unit’s
	power is on. This does not indicate that this unit or the TV is
	malfunctioning. If this occurs, put the unit in standby.
	DO NOT MOVE THE UNIT DURING PLAYBACK
	During playback, the disc rotates at a high speed. Do NOT lift or move
	the unit during playback. Doing so may damage the disc.
	WHEN MOVING THIS UNIT
	When changing the place of installation or packing the unit for
	moving, be sure to remove the disc and return the disc table to its
	original position in the player. Then, press the STANDBY/ON button to
	put the unit in standby, and disconnect the power cord. Moving this
	unit with a disc loaded may result in damage to this unit.
	Maintenance
	If the surface of the unit gets dirty, wipe it with a soft cloth or
	use diluted mild liquid soap. Allow the surface of the unit to dry
	completely before using.

QFor safety, disconnect the power cord from the socket before cleaning.

ppNever spray liquid directly on this unit.

ppDo not use thinner or alcohol as they could damage the surface of the unit.

ppAvoid allowing rubber or plastic materials to touch this product for long periods of time, because they could damage the cabinet.