Loading Data to and Copying from the Hard Disk Source Drive
Loading Data to and Copying from the Hard Disk Source Drive
During initialization (see Step 4 on page 7), the DVD Duplicator performs a self- test to detect source drives. The
The internal hard disk drive was formatted and partitioned at the factory. Each partition occupies 9GB of hard disk space. Partitions are arranged in numerical order starting with partition 00000, and initially contain no data. A set of data loaded into a partition on the hard disk drive is called an “image file.”
To use the hard disk drive as the source drive, you must first load an image file from a DVD into a partition on the hard disk drive, select the partition that contains the data you want to copy, then execute the copy function.
1.Insert a source DVD into the DVD-ROM drive.
This disc contains the data that you wish to copy to the partition on the internal hard disk drive.
2.Press the SET button to select the Load function, then press the RUN button to execute the function.
The data will be loaded into the default first partition (00000).
After a few moments, the source disc will be ejected, signaling the completion of the data load procedure.
3.Remove the source disc from the
Note: If you need to load additional data from various sources, change to another partition first (e.g., 00001) using the Partition Name function in Setup mode, then repeat steps 1 and 2 above.
4.Once the data has been copied to the hard disk drive, insert a blank disc into as many of the target drives as you desire.
5.Using the SET button, change to the Copy function, then press RUN to copy from the hard disk drive to the discs.
The discs will be ejected when the copying process is complete.
6.Remove the copied discs from the Duplicator. You can repeat this procedure from Step 4 if desired.
TEAC 1x10 DVD Duplicator User’s Manual | 9 |
